# SOLIDWORKS Education Practice Problems - Selection Index

This file is a navigation index for the official SOLIDWORKS Education Practice Problems library. It does not reproduce the engineering drawings or their dimensions.

Official source: https://www.solidworks.com/solution/education/practice-problems

Use this index only to select a suitable practice problem. The student should access the original problem from the official SOLIDWORKS source. If tutoring requires the drawing, ask the student to upload a screenshot/image of the official problem. Never invent missing geometry or dimensions.

## Level 1: Basic Sketch and Extrusion

### Practice Problem 1.1
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Rectangles, Circles | Features: Extrude Boss

### Practice Problem 1.2
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss

### Practice Problem 1.3
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Arcs, Circles | Features: Extrude Boss

### Practice Problem 1.4
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: IPS
- Suggested tools/features: | Sketch: Lines, Centerlines, Arcs, Circles, Polygons | Features: Extrude Boss

### Practice Problem 1.5
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: IPS
- Suggested tools/features: | Sketch: Lines, Centerlines, Arcs, Circles, Polygons | Features: Extrude Boss

### Practice Problem 1.6
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Rectangles, Circles | Features: Extrude Boss

### Practice Problem 1.7
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Circles | Features: Extrude Boss, Extrude Cut

### Practice Problem 1.8
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles | Features: Extrude Boss

### Practice Problem 1.9
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss

### Practice Problem 1.10
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Rectangles, Circles | Features: Extrude Boss

### Practice Problem 1.11
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Circles | Features: Extrude Boss

### Practice Problem 1.12
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles | Features: Extrude Boss

### Practice Problem 1.13
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles, Arcs | Features: Extrude Boss

### Practice Problem 1.14
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Sketch Fillets | Features: Extrude Boss

### Practice Problem 1.15
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Arcs | Features: Extrude Boss

### Practice Problem 1.16
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Arcs | Features: Extrude Boss

### Practice Problem 1.17
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Arcs | Features: Extrude Boss

### Practice Problem 1.18
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Arcs | Features: Extrude Boss

### Practice Problem 1.19
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Arcs | Features: Extrude Boss

### Practice Problem 1.20
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Arcs | Features: Extrude Boss

## Level 2: Sketch Tools and End Conditions

### Practice Problem 2.1
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Sketch Fillets | Features: Extrude Boss

### Practice Problem 2.2
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Sketch Fillets | Features: Extrude Boss

### Practice Problem 2.3
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs, Offset Entities | Features: Extrude Boss

### Practice Problem 2.4
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs | Features: Extrude Boss

### Practice Problem 2.5
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Slots | Features: Extrude Boss

### Practice Problem 2.6
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs, Slots | Features: Extrude Boss

### Practice Problem 2.7
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Rectangles, Slots | Features: Extrude Boss

### Practice Problem 2.8
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Trim, Offset Entities | Features: Extrude Boss

### Practice Problem 2.9
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Rectangles | Features: Extrude Boss

### Practice Problem 2.10
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arc, Sketch Fillets, Trim | Features: Extrude Boss

### Practice Problem 2.11
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Sketch Mirror, Trim, Convert Entities | Features: Extrude Boss

### Practice Problem 2.12
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs, Trim, Offset Entities | Features: Extrude Boss

### Practice Problem 2.13
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Polygons | Features: Extrude Boss

### Practice Problem 2.14
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Circles, Rectangles, Polygons | Features: Extrude Boss

### Practice Problem 2.15
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Rectangles, Circles, Polygons | Features: Extrude Boss

### Practice Problem 2.16
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Arcs, Slots, Sketch Fillets | Features: Extrude Boss

### Practice Problem 2.17
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Slots, Sketch Fillets | Features: Extrude Boss

### Practice Problem 2.18
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Slots, Sketch Fillets | Features: Extrude Boss

### Practice Problem 2.19
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Arcs, Offset Entities | Features: Extrude Boss

### Practice Problem 2.20
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Arcs, Polygons | Features: Extrude Boss

## Level 3: Global Variables and Sketch Patterns

### Practice Problem 3.1
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Sketch Patterns | Features: Extrude Boss

### Practice Problem 3.2
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Sketch Patterns | Features: Extrude Boss

### Practice Problem 3.3
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Arcs, Sketch Patterns, Sketch Fillets, Offset Entities | Features: Extrude Boss

### Practice Problem 3.4
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Sketch Patterns, Trim, Offset Entities, Sketch Fillets | Features: Extrude Boss

### Practice Problem 3.5
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles, Sketch Patterns | Features: Extrude Boss

### Practice Problem 3.6
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Arcs, Polygons, Sketch Patterns | Features: Extrude Boss

### Practice Problem 3.7
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles, Sketch Patterns | Features: Extrude Boss

### Practice Problem 3.8
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Polygons, Sketch Patterns | Features: Extrude Boss

## Level 4: Extrude Cut, Fillet and Chamfer

### Practice Problem 4.1
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.2
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arc, Sketch Fillets | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.3
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.4
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.5
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.6
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 35 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Sketch Fillets | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.7
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.8
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.9
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.10
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.11
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.12
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles, Trim, Convert Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.13
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Offset Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.14
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Convert Entities, Offset Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.15
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.16
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.17
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles, Slots | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.18
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles, Arcs, Sketch Fillets | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.19
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs, Slots | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.20
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles, Slots | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.21
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles, Offset Entities | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.22
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles, Arcs | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.23
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.24
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.25
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.26
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Slots, Trim, Rectangles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.27
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Slots, Trim, Sketch Fillets, Offset Entities, Convert Entities | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.28
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.29
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.30
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.31
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Convert Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.32
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Slots, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.33
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Slots, Trim, Arcs, Sketch Fillets | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.34
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Sketch Fillets, Offset Entities, Convert Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | HINT: Use construction lines to set the centers of the sketch.

### Practice Problem 4.35
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.36
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Sketch Fillets | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.37
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.38
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Sketch Fillets | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.39
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.40
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.41
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Slots, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.42
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Trim | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.43
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Arcs, Circles, Trim, Offset Entities | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.44
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Arcs, Circles, Trim, Offset Entities, Convert Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.45
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Offset Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.46
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Circles, Trim, Offset Entities, Convert Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.47
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs, Trim, Convert Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | HINT: Radius “R” is centered on the edge of the R16 arc, where the hole centerline and vertical edge cross.

### Practice Problem 4.48
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Sketch Fillets, Trim | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.49
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Offset Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.50
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.51
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs, Trim | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.52
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Slots | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.53
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Convert Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.54
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Slots, Sketch Mirror | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.55
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Circles, Arcs, Trim, Convert Entities | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.56
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs, Slots | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.57
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Trim, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.58
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.59
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Circles, Arcs, Trim | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.60
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Arcs, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.61
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.62
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.63
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles, Trim, Convert Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.64
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Convert Entities | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.65
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Centerlines, Rectangles, Circles | Features: Extrude Boss, Extrude Cut | HINT: Sketch the 10mm holes on the bottom face.

### Practice Problem 4.66
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.67
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Convert Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 4.68
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Rectangles, Centerlines | Relations: Parallel | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.69
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Rectangles, Polygon | Features: Extrude Boss, Extrude Cut

### Practice Problem 4.70
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Rectangles, Polygon | Features: Extrude Boss, Extrude Cut

## Level 5: Reference Geometry

### Practice Problem 5.1
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Sketch Patterns | Features: Extrude Boss | Reference Geometry: Planes

### Practice Problem 5.2
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss | Reference Geometry: Planes

### Practice Problem 5.3
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Arcs, Circles, Slots | Features: Extrude Boss | Reference Geometry: Planes

### Practice Problem 5.4
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Arcs, Circles, Sketch Fillets | Features: Extrude Boss | Reference Geometry: Planes

### Practice Problem 5.6
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 35 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Reference Geometry: Planes

### Practice Problem 5.7
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim | Features: Extrude Boss, Extrude Cut | Reference Geometry: Planes

### Practice Problem 5.8
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim | Features: Extrude Boss, Extrude Cut | Reference Geometry: Planes

### Practice Problem 5.9
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines,Circles | Features: Extrude Boss, Extrude Cut | Reference Geometry: Planes, Axes

### Practice Problem 5.10
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Sketch Fillets, Convert Entities, Trim | Features: Extrude Boss, Extrude Cut | Reference Geometry: Planes

### Practice Problem 5.11
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Arcs, Circles | Features: Extrude Boss, Extrude Cut | Reference Geometry: Planes

### Practice Problem 5.12
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Arcs, Circles, Trim | Features: Extrude Boss, Extrude Cut | Reference Geometry: Planes

### Practice Problem 5.13
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Reference Geometry: Planes

### Practice Problem 5.14
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles | Features: Extrude Boss, Extrude Cut | Reference Geometry: Planes

### Practice Problem 5.15
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles, Sketch Fillets | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Reference Geometry: Planes

### Practice Problem 5.16
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Rectangles, Sketch Fillets, Offset | Features: Extrude Boss, Extrude Cut, Start and End Conditions | Reference Geometry: Planes and Axes

## Level 6: Revolve Boss and Cut

### Practice Problem 6.1
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Arcs | Features: Revolves

### Practice Problem 6.2
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Revolves, Extrude Boss, Fillets and Chamfers

### Practice Problem 6.3
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs, Polygons | Features: Revolves, Extrude Boss, Fillets and Chamfers | Reference Geometry: Planes

### Practice Problem 6.4
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs | Features: Revolves, Extrude Boss, Fillets and Chamfers

### Practice Problem 6.5
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs | Features: Revolves, Extrude Boss

### Practice Problem 6.6
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines | Features: Revolves

### Practice Problem 6.7
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Slots, Offset Entities | Features: Revolves, Extrude Boss, Extrude Cut

### Practice Problem 6.8
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Sketch Fillets, Offset Entities | Features: Revolves, Extrude Boss, Extrude Cut

### Practice Problem 6.9
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim | Features: Revolves, Extrude Cut

### Practice Problem 6.10
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim, Arcs | Features: Revolves, Extrude Boss, Extrude Cut

### Practice Problem 6.11
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Trim | Features: Revolves, Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 6.12
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Arcs, Trim | Features: Revolves, Extrude Cut

### Practice Problem 6.13
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Reference Geometry: Axes | Features: Revolves, Extrude Boss, Extrude Cut

### Practice Problem 6.14
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Polygons, Trim, Offset Entities, Convert Entities | Features: Revolves, Extrude Cut | Reference Geometry: Planes

### Practice Problem 6.15
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles | Features: Revolves

### Practice Problem 6.16
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Revolves

### Practice Problem 6.17
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Circles, Trim, Convert Entities | Features: Revolves, Extrude Cut

### Practice Problem 6.18
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines | Features: Revolves

### Practice Problem 6.19
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines | Features: Revolves

### Practice Problem 6.20
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Arcs, Rectangles, Slots | Features: Extrude Cut, Revolves | Reference Geometry: Planes

## Level 7: Feature Patterns

### Practice Problem 7.1
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines | Features: Revolves, Extrude Cut | Patterns: Circular

### Practice Problem 7.2
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines | Features: Extrude Boss, Revolves, Fillets and Chamfers | Patterns: Linear | Reference Geometry: Planes

### Practice Problem 7.3
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Arcs, Centerlines | Features: Extrude Boss, Revolves | Patterns: Linear

### Practice Problem 7.4
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Arcs | Features: Revolves | Patterns: Circular

### Practice Problem 7.5
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles | Features: Extrude Boss, Extrude Cut | Patterns: Circular, Mirror | Reference Geometry: Planes

### Practice Problem 7.6
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Rectangles, Offset, Slots, Centerlines | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Linear

### Practice Problem 7.7
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines | Features: Extrude Boss, Revolves, Fillets and Chamfers | Patterns: Circular

### Practice Problem 7.8
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Slots | Features: Extrude Boss, Extrude Cut | Patterns: Linear, Mirror

### Practice Problem 7.9
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 35 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Mirror

### Practice Problem 7.10
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 45 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, ARcs | Features: Extrude Boss, Extrude Cut, Revolves, Fillets and Chamfers | Patterns: Mirror

### Practice Problem 7.11
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Arcs | Features: Extrude Boss, Extrude Cut | Patterns: Mirror | Reference Geometry: Planes

### Practice Problem 7.12
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Extrude Boss, Extrude Cut, Revolves | Patterns: Mirror

### Practice Problem 7.13
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Slots, Rectangles, Sketch Fillets | Features: Extrude Boss, Extrude Cut | Patterns: Mirror

### Practice Problem 7.14
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim, Convert Entities | Features: Revolves, Extrude Cut, Fillets and Chamfers | Patterns: Circular | Reference Geometry: Planes

### Practice Problem 7.15
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Revolves, Extrude Cut | Patterns: Mirror

### Practice Problem 7.16
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Extrude Boss, Extrude Cut, Revolves, Fillets and Chamfers | Patterns: Mirror

### Practice Problem 7.17
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim, Slots, Sketch Fillets | Features: Extrude Boss, Extrude Cut | Patterns: Linear

### Practice Problem 7.18
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles, Arcs, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Mirror

### Practice Problem 7.19
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Mirror | Reference Geometry: Planes

### Practice Problem 7.20
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Mirror

### Practice Problem 7.21
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Extrude Boss, Extrude Cut | Patterns: Mirror

### Practice Problem 7.22
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles, Trim, Slots | Features: Extrude Boss, Extrude Cut | Patterns: Mirror

### Practice Problem 7.23
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Arcs, Circles, Centerlines, Trim, Offset Entities | Features: Extrude Boss, Extrude Cut | Patterns: Mirror

### Practice Problem 7.24
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Extrude Boss, Extrude Cut, Revolves | Patterns: Mirror | Reference Geometry: Planes

### Practice Problem 7.25
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Extrude Boss, Extrude Cut | Patterns: Circular, Mirror | Reference Geometry: Planes

### Practice Problem 7.26
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles | Features: Revolves, Extrude Cut | Patterns: Mirror

### Practice Problem 7.27
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim, Convert Entities | Features: Extrude Boss | Patterns: Mirror

### Practice Problem 7.28
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim, Offset Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Mirror

### Practice Problem 7.29
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Slots, Circles, Centerlines, Rectangles | Features: Extrude Boss, Extrude Cut | Patterns: Mirror

### Practice Problem 7.30
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim, Offset Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Circular, Mirror

### Practice Problem 7.31
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Slots, Rectangles, Offset Entities | Features: Extrude Boss, Extrude Cut | Patterns: Mirror

### Practice Problem 7.32
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Slots | Features: Extrude Boss, Cut with Surface | Reference Geometry: Planes | Patterns: Mirror

### Practice Problem 7.33
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Rectangles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Linear, Mirror

### Practice Problem 7.34
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Circular, Mirror

### Practice Problem 7.35
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines | Features: Extrude Boss | Patterns: Mirror

### Practice Problem 7.36
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Mirror

### Practice Problem 7.38
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Linear

### Practice Problem 7.39
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Arcs | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Mirror

### Practice Problem 7.40
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Arcs, Trim, Rectangles, Offset Entities | Features: Extrude Boss, Extrude Cut | Patterns: Linear, Mirror

### Practice Problem 7.41
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Arcs, Slots, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Patterns: Mirror

### Practice Problem 7.42
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Arcs, Trim, Convert Entities, Offset Entities | Features: Extrude Boss, Extrude Cut | Patterns: Mirror

### Practice Problem 7.43
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Trim | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Reference Geometry: Planes | Patterns: Mirror

### Practice Problem 7.44
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Arcs, Trim, Rectangles, Convert Entities | Features: Extrude Boss, Extrude Cut | Patterns: Mirror

### Practice Problem 7.45
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Arcs, Sketch Fillets, Trim | Features: Extrude Cut, Revolves | Patterns: Circular

### Practice Problem 7.46
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Sketch Fillets, Trim, Offset Entities, Convert Entities | Features: Extrude Boss, Extrude cut | Patterns: Mirror

### Practice Problem 7.47
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Sketch Fillets, Rectangles | Features: Extrude Boss | Reference Geometry: Planes | Patterns: Mirror

### Practice Problem 7.48
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Slots | Features: Extrude Cut, Revolves | Patterns: Circular

### Practice Problem 7.49
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Rectangles, Polygons | Features: Extrude Boss, Extrude Cut | Patterns: Circular | Reference Geometry: Axes

## Level 8: Sweep Boss and Cut

### Practice Problem 8.1
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Polygons, Sketch Fillets | Features: Sweeps

### Practice Problem 8.2
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Sketch Fillets | Features: Sweeps

### Practice Problem 8.3
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: IPS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Arcs | Features: Revolves, Sweeps, Fillets and Chamfers

### Practice Problem 8.4
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: IPS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines | Features: Sweeps, Extrude Cut | Patterns: Mirror

### Practice Problem 8.5
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 40 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines | Features: Lofts, Extrude Boss, Extrude Cut | Patterns: Circular

### Practice Problem 8.6
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Arcs | Features: Sweeps

### Practice Problem 8.7
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Arcs, Centerlines, Slots, Trim | Features: Extrude Boss, Sweeps, Fillets and Chamfers | Patterns: Mirror

### Practice Problem 8.8
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines, Arcs, Rectangles, Sketch Fillets | Features: Lofts, Extrude Boss, Extrude Cut | Reference Geometry: Planes

### Practice Problem 8.9
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Circles, Centerlines | Features: Lofts, Extrude Boss, Extrude Cut | Reference Geometry: Planes

### Practice Problem 8.10
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Sweeps | Reference Geometry: Planes

### Practice Problem 8.11
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Circles, Sketch Fillets | Features: Extrude Boss, Sweeps

### Practice Problem 8.12
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Arcs | Features: Sweeps

### Practice Problem 8.13
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Arcs, Circles, Sketch Fillets, Offset Entities | Features: Revolves, Sweeps, Fillets and Chamfers

### Practice Problem 8.14
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Rectangles, Arcs | Features: Revolves, Sweeps, Fillets and Chamfers

## Level 9: Assemblies and Mates

### Practice Problem 9.1A
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: IPS
- Suggested tools/features: | Assemblies: Inserting Components, Coincident, Concentric, Angle

### Practice Problem 9.1B
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: IPS
- Suggested tools/features: | Assemblies: Angle

### Practice Problem 9.2A
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: IPS
- Suggested tools/features: | Assemblies: Inserting Components, Coincident, Concentric, Width, Angle, Tangent, Distance, Parallel

### Practice Problem 9.2B
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: IPS
- Suggested tools/features: | Assemblies: Angle, Distance

### Practice Problem 9.3A
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: IPS
- Suggested tools/features: | Assemblies: Inserting Components, Coincident, Concentric, Width, Angle

### Practice Problem 9.3B
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: IPS
- Suggested tools/features: | Assemblies: Angle

### Practice Problem 9.4A
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 30 min
- Units: IPS
- Suggested tools/features: | Assemblies: Inserting Components, Coincident, Concentric, Distance, Angle, Parallel

### Practice Problem 9.4B
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: IPS
- Suggested tools/features: | Assemblies: Distance, Angle

### Practice Problem 9.5A
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Assemblies: Inserting Components, Coincident, Concentric, Tangent, Parallel, Distance

### Practice Problem 9.5B
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Assemblies: Distance

### Practice Problem 9.5C
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Assemblies: Distance

### Practice Problem 9.6
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Assemblies: Inserting Components, Coincident, Concentric, Distance, Angle

### Practice Problem 9.7
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Assemblies: Inserting Components, Coincident, Concentric, Width, Angle

### Practice Problem 9.8
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Assemblies: Inserting Components, Coincident, Concentric, Width, Angle, Distance

### Practice Problem 9.10
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: IPS
- Suggested tools/features: | Assemblies: Inserting Components, Coincident, Concentric, Width, Parallel, Perpendicular

### Practice Problem 9.11
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Assemblies: Inserting Components, Coincident, Concentric, Width, Tangent, Perpendicular

## Level 10: CSWA Exam Level

### Practice Problem 10.1
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Slots | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers | Reference Geometry: Planes

### Practice Problem 10.2
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles | Features: Extrude Boss

### Practice Problem 10.3
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Fillets and Chamfers

### Practice Problem 10.4
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Arcs, Rectangles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers, Revolves

### Practice Problem 10.5A
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 35 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut

### Practice Problem 10.5B
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Offset Entities | Features: Extrude Boss, Extrude Cut | Patterns: Mirror

### Practice Problem 10.6
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 40 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs, Sketch Fillets | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 10.7A
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Revolves, Fillets and Chamfers | Reference Geometry: Planes

### Practice Problem 10.7B
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines | Features: Revolves

### Practice Problem 10.7C
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines | Features: Revolves

### Practice Problem 10.8A
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 40 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 10.8B
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Cut

### Practice Problem 10.8C
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles | Features: Extrude Cut

### Practice Problem 10.9A
- Difficulty: Hard
- Certification orientation: CSWA
- Suggested duration: 45 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Arcs, Offset Entities | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 10.9B
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Sketch: Centerlines, Rectangles | Features: Extrude Boss

### Practice Problem 10.9C
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Features: Fillets and Chamfers

### Practice Problem 10.10A
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Sketch: Lines, Centerlines, Circles, Rectangles | Features: Extrude Boss, Extrude Cut, Fillets and Chamfers

### Practice Problem 10.10B
- Difficulty: Medium
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Offset Entities | Features: Extrude Cut

### Practice Problem 10.10C
- Difficulty: Easy
- Certification orientation: CSWA
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Sketch: Offset Entities | Features: Extrude Cut, Fillets and Chamfers

## Level 11: Hole Wizard

### Practice Problem 11.1
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: IPS
- Suggested tools/features: | Hole Wizard

### Practice Problem 11.2
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Pattern | Hole Wizard

### Practice Problem 11.3
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: IPS
- Suggested tools/features: | Pattern | Hole Wizard

### Practice Problem 11.4
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Hole Wizard H INT: All the holes can be created with one Hole Wizard feature and the 3DSketch option.

### Practice Problem 11.5
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Hole Wizard

### Practice Problem 11.6
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Hole Wizard

### Practice Problem 11.7
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Hole Wizard

### Practice Problem 11.8
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Hole Wizard

### Practice Problem 11.11
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Pattern | Hole Wizard

## Level 12: Draft

### Practice Problem 12.1
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Pattern | Draft

### Practice Problem 12.2
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Pattern | Draft H INTS: | Set loft to use Normal to Profile start and e nd conditions. | Create fillets before adding draft

### Practice Problem 12.3
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Pattern | Draft H INTS: | All dimensions are to pre-d raft geometry. | No draft on feet.

### Practice Problem 12.4
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Plane | Draft H INT: | Draft applied to handle ends and edges of b lade.

### Practice Problem 12.5
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Draft H INTS: | Build handle portion of cap with draft b efore continuing with the rest of the part. | All fillets are done after drafts.

### Practice Problem 12.6
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Pattern | Draft H INTS: | Use D raft Angle 49 degrees to achieve the intended taper-to-zero. | Create base profile and extrude first, t hen add draft.

### Practice Problem 12.7
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Pattern | Draft H INTS: | Dimensions in TOP view are for the base fe ature before draft is applied. | There is no draft on the midline rim.

### Practice Problem 12.9
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: IPS
- Suggested tools/features: | Draft

## Level 13: Shell

### Practice Problem 13.1
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Pattern | Hole Wizard | Shell

### Practice Problem 13.2
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Shell H INT: Use a linear Direction of Extrusion, not the normal direction.

### Practice Problem 13.3
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Shell H INT: Shell can be applied to inside or the outside.

### Practice Problem 13.4
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Hole W izard* (see hint) | Shell H INTS: | Use Multi-t hickness shell on the central hole face. | *C ounterBore needs sketch modification based off M12 Hex Head Bolt.

### Practice Problem 13.5
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Shell

### Practice Problem 13.6
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Shell

### Practice Problem 13.7
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Shell

### Practice Problem 13.8
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Loft | Shell

### Practice Problem 13.9A
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Shell | Draft H INTS: | Assume tangency where applicable. | Version A: D = 60mm, Shell Thickness = 5 mm.

### Practice Problem 13.9B
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Shell H INT: Alter the part 13.9A as indicated: Version B: D = 80mm, Shell Thickness = 7mm

### Practice Problem 13.10
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Shell

### Practice Problem 13.11
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Shell H INT: Note different thicknesses; use multi- thickness shell.

### Practice Problem 13.12
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Shell | Draft H INT: Dimensions in the top view indicate the base feature shape before draft, fillet and shell features.

## Level 14: Rib

### Practice Problem 14.1
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Rib H INT: The recessed pockets do not need to be identical in size.

### Practice Problem 14.2
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Rib | Hole Wizard H INT: The rib arc ends aligned with the centers of the CSK holes.

### Practice Problem 14.3
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Pattern | Rib H INT: Create a ‘bottom’ for the ribs, then cut the material away.

### Practice Problem 14.5
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Rib | Hole Wizard

### Practice Problem 14.6A
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Rib | Hole Wizard

### Practice Problem 14.7
- Difficulty: Moderate
- Certification orientation: CSWP
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Rib | Hole Wizard

## Level 15: Configurations

### Practice Problem 15.1
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Configurations | Hole Wizard

### Practice Problem 15.2A
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: I PS
- Suggested tools/features: | Configurations | HINT: Configuration 1

### Practice Problem 15.2B
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 5 min
- Units: I PS
- Suggested tools/features: | Configurations | HINT: C onfiguration 2

### Practice Problem 15.2C
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 5 min
- Units: I PS
- Suggested tools/features: | Configurations | HINT: C onfiguration 3

### Practice Problem 15.2D
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: I PS
- Suggested tools/features: | Configurations | HINT: Configuration 4

### Practice Problem 15.3
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Configurations | Hole Wizard H INT: Configuration UH.4 with linear pattern below.

### Practice Problem 15.4A
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Configurations | Hole Wizard H INTS: | Each sheet (15.4A-D ) shows a different configuration. | See additional drawing sheets for detail on t he specialized features.

### Practice Problem 15.4B
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Configurations | Hole Wizard H INTS: | Each sheet (15.4A-D ) shows a different configuration. | See additional drawing sheets for detail on t he specialized features.

### Practice Problem 15.4C
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Configurations | Hole Wizard H INTS: | Each sheet (15.4A-D ) shows a different configuration. | See additional drawing sheets for detail on t he specialized features.

### Practice Problem 15.4D
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Configurations | Hole Wizard H INTS: | Each sheet (15.4A-D ) shows a different configuration. | See additional drawing sheets for detail on t he specialized features.

### Practice Problem 15.5
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Configurations H INTS: | The "ASSY" configuration is a simplified v ersion for use in large assemblies where no detail is needed. | Suppress the web recesses and fillets.

### Practice Problem 15.6
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Configurations

### Practice Problem 15.8
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Configurations N ote: Thin feature thickness is applied from the inside out.

## Level 16: Global Variables and Equations

### Practice Problem 16.1
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Link Values I nstructions: 1. Build the part as indicated. Use Linked Values ("RibThickness") to equate the rib thickness to the thickness of the central spindle wall. Measure Volume1. 2. Change RibThickness to 3mm. Measure Volume 2.

### Practice Problem 16.2
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Global Variables | Equations | Configurations H INTS: | Create 4 configurations of the part shown u sing Equations and Global Variables. | See chart for specifications.

### Practice Problem 16.3
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Equations I nstructions: | Build the part with an initial value for A = 1200mm. Measure Volume 1. | Change A to 900. M easure Volume 2.

### Practice Problem 16.4
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Equations | Global Variables | Configurations

### Practice Problem 16.5
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Equations | Global Variables | Configurations H INTS: | Use Equations to set the length, spacing and # h oles. | Spacing "A" = is always W - 20. | Center row always contains one less hole t han top or bottom row. | Create 3 versions as per table.

## Level 17: Assembly Tools

### Practice Problem 17.3B
- Difficulty: Easy
- Certification orientation: C SWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Move and Rotate | Collision Detection H INTS: | Part B | Suppress the 10 degree angle mate. | Allow subassembly Conn Rod Assy to move. | Maintaining the horizontal orientation, move t he probe component down until collision. | Find Center of Mass.

### Practice Problem 17.3C
- Difficulty: Easy
- Certification orientation: C SWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Move and Rotate | Collision Detection H INTS: | Part C | LOCK the angle of th e Cylinder subassembly (purple/gold) relative to the base (green) at its current position. | Suppress the horizontal relation on the p robe component. | Move the probe tip down until collision. | Find Center of Mass.

### Practice Problem 17.4B
- Difficulty: Easy
- Certification orientation: C SWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Interference Detection. | Move and Rotate | Collision Detection H INTS: | 1) Switch to the Configuration “Low”. | 2) Check for interference and investigate. | 3) Suppress the interfering feature (“Cross- S par”) in the Platform part to eliminate the interference. | 4) Find C enter of Mass.

### Practice Problem 17.5B
- Difficulty: Easy
- Certification orientation: C SWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Interference Detection

### Practice Problem 17.5C
- Difficulty: Easy
- Certification orientation: C SWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Interference Detection H INTS: | Check interferences between ROD and MAIN B RIDGE. | Change MAIN BRIDGE d imension as shown to eliminate the interference. | Find MAIN BRIDGE part volume.

### Practice Problem 17.6B
- Difficulty: Easy
- Certification orientation: C SWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Collision Detection H INT: | Use Co llision Detection to determine the full movement of the Head. | Find Center of Mass for both positions.

### Practice Problem 17.7B
- Difficulty: Easy
- Certification orientation: C SWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Move and Rotate | Collision Detection H INTS: | Close the ladder to the collision. | Move the X Brace to the opposite side of the Brace_Side. | Move the Step Side again to the collision. | Find Center of Mass.

## Level 18: CSWP Exam Level

### Practice Problem 18.1
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Extrude | Fillet | Draft | Hole Wizard H INT: | The counterbore hole requires use of a 3D s ketch.

### Practice Problem 18.2
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Extrude | Chamfer | Hole Wizard H INT: | The sketch of the large cut requires c onstruction geometry.

### Practice Problem 18.3
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Extrude | Fillet | Mirror | Shell | Hole Wizard H INT: | The order of the features relative to the shell i s important.

### Practice Problem 18.4
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Extrude | Fillet | Plane | Pattern | Rib H INT: | Build half the model and use a mirror p attern.

### Practice Problem 18.5A
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Extrude | Revolve | Fillet | Plane | Pattern HIN T: | Build the part here and make changes in 18.5B .

### Practice Problem 18.5B
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Editing H INT: | Edit part 18.5A using the changes d ocumented here.

### Practice Problem 18.6A
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Extrude | Fillet | Pattern | Hole Wizard H INT: | Build the part here and make changes in 18. 6B.

### Practice Problem 18.6B
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Editing H INT: | Edit part 18.6A using the changes d ocumented here

### Practice Problem 18.7A
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Extrude | Fillet H INT: | Build the part here and make changes in 18. 7B.

### Practice Problem 18.7B
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Editing H INTS: | Edit part 18.7A using the changes d ocumented here | Part becomes not symmetric.

### Practice Problem 18.8A
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Extrude | Fillet | Shell H INT: | Build the part here and make changes in 18. 8B.

### Practice Problem 18.8B
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Editing H INT: | Edit part 18.8A using the changes d ocumented here.

### Practice Problem 18.9A
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Revolve | Extrude | Fillet | Hole Wizard H INT: | Build the part here and make changes in 18. 9B.

### Practice Problem 18.9B
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Editing H INT: | Edit part 18.9A using the changes d ocumented here.

### Practice Problem 18.10
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Extrude | Pattern | Fillet H INT: | Fillets includes a full round fillet.

### Practice Problem 18.11
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 30 min
- Units: MMGS
- Suggested tools/features: | Extrude | Fillet | Hole W izard

### Practice Problem 18.12A
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Extrude H INT: | Build the part here and make changes in 18. 12B.

### Practice Problem 18.12B
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Editing | Full round fillets H INT: | Edit part 18.12A using the changes d ocumented here. | Part becomes symmetric.

### Practice Problem 18.13
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Extrude | Plane | Loft | Pattern | Shell | Hole Wizard | Rib

### Practice Problem 18.14
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Extrude | Plane | Hole Wizard

### Practice Problem 18.15
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Extrude | Plane | Hole Wizard | Rib

### Practice Problem 18.16
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Extrude | Chamfer | Hole Wizard

### Practice Problem 18.17A
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Extrude | Chamfer | Hole Wizard | Equations | Configure Dimension H INTS: | Create the part and configure it as shown on the f ollowing slides, parts B-D. | Current configuration A1 is bolded. | Equations: o Diameter “SM_D” is 65% of dia. “D”. o “S LOT_w ” is 1/3 of the thickness “T”.

### Practice Problem 18.17B
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Configure Dimension H INT: | Current configuration A2 is bolded.

### Practice Problem 18.17C
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Configure Dimension H INT: | Current configuration A3 is bolded.

### Practice Problem 18.17D
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 5 min
- Units: MMGS
- Suggested tools/features: | Configure Dimension H INT: | Current configuration A4 is bolded.

### Practice Problem 18.18
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Extrude | Draft | Fillet

### Practice Problem 18.19
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 25 min
- Units: MMGS
- Suggested tools/features: | Extrude | Pattern | Hole W izard

### Practice Problem 18.20A
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Extrude | Fillet (full round) | Pattern H INT: | Build the part here and make changes in 18. 20B. | Use full round fillets for ends of (3) interior cu ts.

### Practice Problem 18.20B
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Extrude | Editing H INT: | Edit part 18.20A using the changes d ocumented here. | Change the angle of the of interior cuts. | Add lugs on the opposite end.

### Practice Problem 18.21
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 10 min
- Units: MMGS
- Suggested tools/features: | Extrude | Shell | Pattern H INT: | Base is not shelled.

### Practice Problem 18.22
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 15 min
- Units: MMGS
- Suggested tools/features: | Extrude | Shell | Plane | Pattern | Hole Wizard | Fillet

### Practice Problem 18.23
- Difficulty: Easy
- Certification orientation: CSWP
- Suggested duration: 20 min
- Units: MMGS
- Suggested tools/features: | Revolve | Extrude | Shell | Fillet | Rib H INT: Add fillets before shell.